Difference between revisions of "CEB Press v17.08"

From Open Source Ecology
Jump to: navigation, search
(Development Template)
(Updated CNC Cut Files)
Line 34: Line 34:
 
==Updated CNC Cut Files==
 
==Updated CNC Cut Files==
  
*Master CAM File - '''[[File:CEB_v1708_CAM.zip]]'''. Some of the individual files are [[File:CEB_DXFs.zip]] - but a lot of them failed to import into [[LibreCAD]].
+
*Master CAM File - '''[[File:CEB_v1708_CAM.zip]]'''.  
*Steel order from Seaman and Schuske - [[File:seamanandschuske.zip]]
+
:*There are pieces cut from eighth inch steel, quarter inch steel, and half inch steel - marked accordingly
 +
:*Broken line in 1/8" material is a bend line
 +
:*Numbers in brackets refer to the quantities
 +
*Some of the individual files are [[File:CEB_DXFs.zip]] - but a lot of them failed to import into [[LibreCAD]].
 +
*Steel order from Seaman and Schuske for only the 1/2" steel plate - nested onto 5x10 foot steel- [[File:seamanandschuske.zip]]
  
 
=BOM=
 
=BOM=

Revision as of 07:18, 3 January 2018

Development Template

[edit]

Controller

See CEB Press Controller v17.08

Solenoid Valve

edit

Control Code

See CEB Press Controller Genealogy for previous versions.

2017 version:

edit

CAD

CAM

Updated CNC Cut Files

  • There are pieces cut from eighth inch steel, quarter inch steel, and half inch steel - marked accordingly
  • Broken line in 1/8" material is a bend line
  • Numbers in brackets refer to the quantities

BOM

edit

Build Instructions

Hydraulics + Controls

edit

Language Agnostic Instructionals - Structure

edit

User Manual

See CEB_Press_v17.08_Owner's_Manual

CEB Press Upgrades 2017 - Working Docs on Redesign

edit

edit

Use

v16.09 in use without hopper and with manual controls to allow workshop participants to operate the machine hands on:

Ceb2016.jpg


Cylinder Working Doc

CEB Cylinder

Improvements and Future Work

Our machine nears perfection. Last year we developed a modular CEB controller that is made from common parts and CAT 5 quick connects from controller to solenoids. We have tested a stationary soil mixer last year. This year the several improvements include:

  • Further Simplification of drawer guides
  • Visual logic programming via Ardublock
  • CNC torch table cutting with the D3D CNC Torch Table. We will do various test cuts to verify parts fit, though we will be outsourcing from our local fab shop so that we have a guaranteed parts set on hand.
  • CNC-cut Power cube with the same frame design as the D3D frame.
  • Open Source CEB Cylinder. Hydraulic open source cylinder for serviceability . Cylinder sourcing has been problematic due to our specific requirements, so we will make our own from a kit, while starting to explore the 3D printability of cylinder seals.
  • New brute force mixer/rock crusher that doses cement for full control and complete mixing of soil, going for commercially-viable block. The concept is just begun, full design is forthcoming.

Optimizations

  • Poka-yoke the grate frame sides
  • Cut angle poka-yokes for the frame mid, bottom, top

Team Needs

  • Check.pngCEB CAD upgrades - starting from data collection on last year's machine


Advanced Soil Preparation Concept

CEB Soil Preparation Concept

Future Work

CEB Press Future Work

Links