April 2011 Production Run Bolts BOM

From Open Source Ecology
Jump to: navigation, search

Tractor (1 tractor)

Functionality list:

3/4”:

  • [14] 5"bolts+[14] nuts + [44] washers to suit front loader
  • [8] 4.5” bolts + [8] nuts bolts if available, if not, add to above
  • [4] 4.5" bolts; [8] nuts; [4] nylon lock nuts. Mounting of wheel bushings to wheel shafts.
  • [32] 5-1/2", with [32] washers for one side and [32] metal lock nuts. For wheel plates & cylinder plates.
  • [42] 3/4"x9" bolts, [84] washers, and [42] metal lock nuts. This is for the assembly of the main frame.
  • [16] 1/2"x2" bolts + [16] nylon lock nuts + [16] lock washers to suit. Motor attachment to motor QA/interface plate. Equivalent to 32" of threaded rod.
  • [8] 3/4"x2" bolts for motor; [8] nuts to weld; [8] lock washers. Attachment of motor interface plate to frame,
  • [32] 5/8"x2"bolts + [32] metal lock nuts, [32] lock washers to suit. Mounting of bearings to frame.
  • [32] 9/16"x1.5" bolts, [32] washers, [32] nylon lock nuts. Attachment of wheel to wheel hub. Includes studs, nuts, and washers. (2” will do if no 1.5)
  • [6] 5.5” for power cube mounts, [6] metal lock, [6] washers
  • [2] 5”x1/2” for valve mounts [2]nuts and [2] washers

.

TOTALS (above is checked 4/29/00, totals here are not checked)

  • [40] 3/4"x5.5" bolts
  • [42] 3/4"x9" bolts
  • [4] 3/4"x4.5" bolts
  • [8] 3/4"x2" bolts
  • [120] 3/4" washers
  • [80] 3/4" metal lock nuts
  • [16] 3/4" nuts
  • [4] 3/4" nylon lock nuts
  • [8] 3/4" lock washers
  • [16] 1/2"x2" bolts
  • [16] 1/2" nylon lock nuts
  • [16] 1/2" lock washers
  • [32] 5/8"x2" bolts
  • [32] 5/8" metal lock nuts
  • [32] 5/8" lock washers
  • [32] 9/16"x2" bolts
  • [32] 9/16" washers
  • [32] 9/16" nylon lock nuts

CEB Press Bolts (x1)

  • [32] 1/2"x1.5" bolts, [32] nuts, [32] washers
  • [10] 1/2"x3" bolts, [10] nuts, [10] washers
  • [32] 3/4"x1.5" bolts, [32] nuts
  • [4] 12mmx50mm bolts, [12] nuts, [16] washers, [8] lock washers
  • Main cylinder adjustment, front to back: [2] 1/2"x1.5" bolts with nuts
  • Main cylinder adjustments, 3/4"x______________ (can use threaded rod with welded nut: 2 feet of rod, [2] 3/4" nuts
  • Hopper shaker assembly: [4] 3/8"x2" bolts with [4] lock nuts, [4] lock washers; use keyed shaft for mounting to motor

Soil Pulverizer

  • 1.5x½ stubs – 3 with washers for hinges
  • [2]1"x3”, 2 metal lock nuts 2 nuts
  • [8] 1.5"x1/2” short bolt adjusters, [8] nuts
  • [2] 5” x 3/4", washer + metal locknut
  • [8] 2"x5/8” bolts + [8] metal locknuts