File:10pitch.scad.zip
10pitch.scad.zip (file size: 936 bytes, MIME type: application/zip)
Warning: This file type may contain malicious code.
By executing it, your system may be compromised.
Usage Notes
- To create a pulley - create a small belt, and subtract the belt from a cylinder to get the tooth profile.
Version Notes
- 15:01, 8 June 2020 - 84 teeth, 10 pitch, 16 mm high - 2.4 mm thin part outside of teeth
- starting with 9 teeth, 25 mm high, then to 88 teeth 16 mm high for Stage 2
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Dimensions | User | Comment | |
---|---|---|---|---|
current | 23:58, 16 June 2020 | (936 bytes) | Marcin (talk | contribs) | Starts the 32 mm wide belt. 16 tooth sprocket creation. |
20:01, 8 June 2020 | (933 bytes) | Marcin (talk | contribs) | ||
23:17, 6 June 2020 | (933 bytes) | Marcin (talk | contribs) | 10 pitch 88 teeth, about 11" diameter for 10" sprocket | |
01:07, 5 June 2020 | (924 bytes) | Marcin (talk | contribs) | 10 pitch 9 teeth. | |
00:50, 5 June 2020 | (911 bytes) | Marcin (talk | contribs) |
- You cannot overwrite this file.
File usage
The following page links to this file: