D3dcablechain.zip ‎(file size: 607 KB, MIME type: application/zip)

Warning: This file type may contain malicious code. By executing it, your system may be compromised.

File Description

File Optimization

Each chain link, when imported from an STL file, takes 240k. 44 links means 10MB just for the chain. We need to reduce this by redrawing natively in FreeCAD.

Original file was uploaded when cable chain system for D3D was not finished. It turns out that a connection bolted to the motor 3d printed piece is convenient, while introducing no addition to the Unique Part Count. In order to achieve this, the initial piece of the cable chain was modified to accept a 6 mm bolt type that is already in use.
To use the bolt, the beginning terminal piece of cable chain must be modified
Modified start piece with 6.5 mm hole:

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	12:21, 15 September 2018	(607 KB)	Marcin (talk \| contribs)
	21:06, 12 September 2018	(75 KB)	Ferdi (talk \| contribs)	added M6 hole
	00:53, 23 May 2017	(67 KB)	Marcin (talk \| contribs)	Updated file names according to picture on top of this page.
	22:18, 28 March 2017	(67 KB)	Marcin (talk \| contribs)	Starting chain link modified for attachment with a 6 mm bolt. See page notes.
	01:01, 24 March 2017	(66 KB)	Marcin (talk \| contribs)

The following 3 pages link to this file: