File:Hydraulic Cylinder 2.5 inch bore 36 inch stroke.skp
Hydraulic_Cylinder_2.5_inch_bore_36_inch_stroke.skp (file size: 446 KB, MIME type: application/x-koan)
Warning: This file type may contain malicious code.
By executing it, your system may be compromised.
Warnings/Caveats
This model is only intended to show the retracted and extended distance between the mountings of the hyrdaulic cylinder. It should be noted that the model is only a work in progress and a lot of the finer details of the geometry are not accurate but the key dimensions are sufficient to allow progress on this task: http://opensourceecology.org/wiki/Development_Status_and_Needs#Commitments_for_May_30-31_Design_Sprint "cylinder fitting on backhoe."
Essentially I have tried to model item# 9-6775 from https://www.surpluscenter.com/item.asp?item=9-6775&catname=hydraulic
- Bore 2-1/2"
- Stroke 36"
- Rod dia 1-1/2"
- Ports 3/8" NPT (port geometry not accurate)
- Retracted Length 48-5/8" (accurate on model)
- Extended Length 84-5/8" (accurate on model)
- End Mountings (geometry of the end mountings is not accurate )
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Dimensions | User | Comment | |
---|---|---|---|---|
current | 23:03, 1 June 2013 | (446 KB) | Samthetechie (talk | contribs) | =Warnings/Caveats= This model is only intended to show the retracted and extended distance between the mountings of the hyrdaulic cylinder. It should be noted that model is only a work in progress and a lot of the finer details of the geometry are not ... |
- You cannot overwrite this file.
File usage
The following 3 pages link to this file: