Grate

From Open Source Ecology
Jump to: navigation, search

Contents

[edit] Grate for CEB Press

Grate uses:

  • 1/4" x 2" x 2" Steel Angle
  • 1/4" x 2" Steel Flat
  • 3/4" Nuts and Bolts into 13/16" (20mm) dia holes

Gratedim1.jpg


Grate11.jpg Grate12.jpg Grate13.jpg Grate14.jpg

Grate15.jpg Grate16.jpg Grate17.jpg Grate18.jpg

Grate19.jpg Grate20.jpg Grate21.jpg Grate22.jpg

Grate23.jpg Grate24.jpg Grate25.jpg Grate26.jpg

[edit] Grate Deflectors for CEB Press

Grate deflectors use:

  • 1/8" thick steel sheet
  • 1/4" x 2" x 2" steel angle

Short deflector sheet: 27" x 14" (x2)

Holes near bottom 27" edge: 9", 18" (13/16" dia)


Long deflector angle: 6' long

Holes near bottom 6' edge: 26", 46" (13/16" dia)


Long deflector sheet: 36" x 9" (x2)


Grate27.jpg Grate28.jpg Grate29.jpg Grate30.jpg

Grate31.jpg Grate32.jpg Grate33.jpg Grate34.jpg

Grate35.jpg

[edit] Grate Hinges for CEB Press

Grate Hinges use:

  • 1/4" x 2" Steel Flat
  • 1/2" x 3" Steel Flat
  • 1/2" x 6" Steel Flat
  • Steel Piano Hinges

Piano Hinge: 16" long (x2)


Thin Hinge Flat: 24" (x2)

Centered Holes along 24": 2", 22" (24mm dia)


Thick Hinge Flat: 30" long (x2, one for front hinge is 3" wide and one for back hinge is 6" wide)

Holes along top of 30" edge: 1.5", 28.5" (24mm dia)


Grate36.jpg Grate37.jpg Grate38.jpg Grate39.jpg

Grate40.jpg Grate41.jpg Grate42.jpg Grate43.jpg

Revision: back hinge has 1/2" x 6" x 30" steel flat

200px Grate45.jpg Grate46.jpg

[edit] Grate Supports for CEB Press


Grate Supports use:

3/16" x 2.5" x 2.5" steel square tube, 4 lengths of 6"

1/4" x 2" x 2" steel square tube, 2 lengths of X", 2 lengths of X"

Personal tools
Namespaces

Variants
Actions
Navigation
Open Source Ecology
Toolbox
Topics