Hay Rake/Research Development

From Open Source Ecology
Jump to: navigation, search


Hay Rake
   Home  |  Research & Development  |  Bill of Materials  |  Manufacturing Instructions  |  User's Manual  |  User Reviews    Hay Rake.png


Research[edit]

  • Hay Rake Function is to move hay into windrows for ease of baling.
  • Window is a row of cut hay or crop.
Windrow
  • Baling is the process of compacting cut hay into round or square packages called bales.
Round Bale

Theory[edit]

  • Raking Action continuously lifts and contacts the hay at an angle as to move the hay to one side of the hay rake.

Relevant Links[edit]

Parallel Bar Hay Rake

Conceptual Notes[edit]

Development[edit]

Overview[edit]

  • Raking System
  • Hydraulic System
  • Structural System

Raking System[edit]

Reel[edit]

  • Reel Plate - is the metal component that holds the reel bars in place. The reel bars are joined between two reel plates.
  • Reel Bar - are long metal square bars that connect the two reel plates and provide a mounting surface for the tines. 4 or 6 reel bars should be used.
  • Tines - are thin bent metal bars that attach onto the reel bar for raking hay as the reel rotates.
  • Reel Coupling - is a metal component that connects the reel plate to the shaft of the reel hydraulic motor.
  • Reel Guards - are fixed metal round bars that mesh with the front of the rotating reel and prevent hay from catching onto the tines and being hurled behind the hay rake.

Hydraulic System[edit]

  • Reel Hydraulic Motor - rotates the reel when powered.

Structural System[edit]

  • Tow Pin and Jaw

Top Frame[edit]

  • Top Frame - consists of two metal square tubes that connect to the tow pin and jaw at the front, the top reel frame around the middle, and the wheel mounts at the rear.
  • Wheel Mount
  • Wheel

Reel Frame[edit]

  • Top Reel Frame consists of two metal square tubes that each connect to two points on the top frame and two points at the top of the reel guard frame.
  • Reel Guard Frame consists of two metal square tubes between which mounts the reel guards and at the side of which fastens the hydraulic motor mount.
  • Reel Hydraulic Motor Mount

Design[edit]


Industry Standards[edit]

Industry Standard GVCSTool

Funding[edit]

Wanted: List of expenses for prototyping and documenting GVCSTool

Peer Reviews[edit]

Wanted: Peer reviews from the scientific community regarding the R&D of GVCSTool

Experiments and Prototypes[edit]

Wanted: Empirical data on performance

Experimental Results[edit]

Prototype Notes, Observations, etc.[edit]

Failure Mode Analysis[edit]

Testing Results[edit]

Recommendations for Improvement[edit]