OSE Linux Testing - Marcin

From Open Source Ecology
Jump to: navigation, search

January 2018

  • Using HP Pavilion laptop
  • Chromium locked up. I got a couple tabs working, then no new content would load in further tabs. Opened up Firefox, and it worked - such as Jitsi.

September 2017

  • Summary - excellent and fast speed running off USB - definitely faster than when installed on my 2 other computers. Wireless works no problem. Issues identified below:
  • EPA workbench - most of the EPA buttons are missing -

Epamissing.jpg

This is what this should be like:

Epaworkbench.jpg

  • Arduino IDE can't upload file to Arduino Mega. Port was set and board selected.

Megaconnectionissue.jpg

  • Notes: can we make files in GIMP and Chromium downloads save on Desktop as the default?
  • OSE Marlin looks good - but can it be called OSE Marlin, and be under Sketchbook, not under Open Recent?
  • Where do I find D3D_Lulzbot_Cura#Configuration_Profile_-_Files for Cura? It's mpt at usr/share/cura/reources/machine_profiles . We should put it on the desktop or in Home Folder.
  • Cura fails to connect to 3D printer - Changing monitoring state from 'Offline' to 'Opening serial port'

Connecting to: /dev/ttyACM0 with baudrate: 115200 (configured) Unexpected error while connecting to serial port: /dev/ttyACM0 SerialException: '[Errno 13] could not open port /dev/ttyACM0: [Errno 13] Permission denied: '/dev/ttyACM0 @ machineCom.py:_monitor:357 Found no ports to try for auto detection Changing monitoring state from 'Opening serial port' to 'Error: Failed to autodetect serial port.' Changing monitoring state from 'Offline' to 'Opening serial port' Connecting to: /dev/ttyACM0 with baudrate: 115200 (configured) Unexpected error while connecting to serial port: /dev/ttyACM0 SerialException: '[Errno 13] could not open port /dev/ttyACM0: [Errno 13] Permission denied: '/dev/ttyACM0 @ machineCom.py:_monitor:357 Found no ports to try for auto detection Changing monitoring state from 'Opening serial port' to 'Error: Failed to autodetect serial port.' Changing monitoring state from 'Offline' to 'Opening serial port' Connecting to: /dev/ttyACM0 with baudrate: 115200 (configured) Unexpected error while connecting to serial port: /dev/ttyACM0 SerialException: '[Errno 13] could not open port /dev/ttyACM0: [Errno 13] Permission denied: '/dev/ttyACM0 @ machineCom.py:_monitor:357 Found no ports to try for auto detection Changing monitoring state from 'Opening serial port' to 'Error: Failed to autodetect serial port.' Changing monitoring state from 'Offline' to 'Opening serial port' Connecting to: /dev/ttyACM0 with baudrate: 115200 (configured) Unexpected error while connecting to serial port: /dev/ttyACM0 SerialException: '[Errno 13] could not open port /dev/ttyACM0: [Errno 13] Permission denied: '/dev/ttyACM0 @ machineCom.py:_monitor:357 Found no ports to try for auto detection Changing monitoring state from 'Opening serial port' to 'Error: Failed to autodetect serial port.'

Retrieved from "https://wiki.opensourceecology.org/index.php?title=OSE_Linux_Testing_-_Marcin&oldid=163464"