Power Cube VII

From Open Source Ecology
(Redirected from Powercube 7)
Jump to: navigation, search

Assembly Video: Power Cube Assembly

Pclight.jpg

OSE-infographic-powercube-v1-5.jpg

Introduction

The Power Cube, Version 7 is a powerful, portable hydraulic power supply that operates efficiently and with minimal noise. The design combines a 28 HP Briggs & Stratton engine and a fixed-displacement hydraulic pump that has proven to work well with OSE machines and for other compatible hydraulic machines.

The Power Cube 7 marks the next level of quick connect modularity, making it easy to assemble, use and maintain.

The Power Cube is standard for all hydraulic equipment in the Global Village Construction Set.

Features

  • Compact hydraulic power source for OSE and other compatible hydraulic tools
  • Electric start, 28 horsepower air-cooled engine
  • Briggs & Stratton muffler for low noise level
  • Controls easily accessible for safety and comfort
  • Standard quick connect hydraulic couplers
  • Modular design simplifies maintenance and parts replacement
  • Removable 7 gallon oil reservoir and fuel tank
  • Heavy duty 6-tube oil cooler with fan cool the hydraulic fluid
  • Sturdy frame protects unit from damage
  • Quick attach plates and hoist eyes simplify transportation

Specifications

  • Model: OSE Power Cube, Version 7
  • Engine: Briggs & Stratton Professional Series, 28 HP
  • Fuel Capacity: 7 Gallons
  • Pressure (maximum): 3000 PSI
  • Flow (maximum): 15.2 GPM
  • Weight (approximate): 400 lbs

Development

The Power Cube has gone through a series of updates and this page reflects the current designs of Version 7 of the Power Cube.

Power Cube VII

This design has proven to work well and has had few updates lately. Here are the latest updates:

Oct 2014: Added a pressure relief valve and associated plumbing - TLG.
Oct 2014: Changed sight gauge to shorter model and moved above the suction strainer for greater visibility - TLG.

Files

These are all the latest releases. See file revision history for other versions.

Sketchup: File:Power Cube VII.skp

Bill Of Materials (BOM): File:Power Cube VII BOM.pdf

Modules (Sketchup drawings):

Power Cube Working Document: ["https://docs.google.com/presentation/d/1oJbd8zQPIdDcFlyZn8Gj6_swQh8RWOkQLQ6hae8pHZ0/embed?start=false&loop=false&delayms=3000"]

Fabrication Steps

The Power Cube is a modular design. The modules are built separately, then combined for the complete Power Cube. The order of module fabrication is not important, but they are all necessary to complete a Power Cube.

Module fabrication procedures are detailed below:

Fuel Tank Module

  • Cut Steel: 6" x 12" tube and 2 each: 1/4" x 6" x 12", 1/4" x 4" x 4" and 1/4" x 1" x 4"
  • Cut holes in tube per drawing (drill small hole, torch large hole)
  • Test that fuel pickup fits in small hole - grind / file hole to fit
  • Grind ends of tube square if cut with torch
  • Weld end plate to tube end nearest fuel filler
    • See note below for welding: Hydraulic_Reservoir_and_Fuel_Tank
  • Weld fuel filler neck (use low setting for thin steel)
  • Assemble Fuel Pickup
    • Insert tube into compression fitting and tighten hand-tight, then wrench-tighten 1/2 turn. Loosen and set the tube part down. Wrap teflon tape on threads of hose barb and thread into top of compression fitting and tighten (don't overdo it: we're working with brass).
Fuel Pickup.png
  • Let tank cool, apply gasket sealant to smaller hole and install fuel pickup
    • Reach inside the open end of the tank with tube, align with hole and screw top of compression fitting from above, then tighten.
  • Weld remaining end plate
  • Weld mounting brackets together, then to tank (do not weld inside edge of bracket)
Tank Bracket.png Tank Bracket Weld.png
  • Weld control panel bracket to tank
  • Weld bolts to tank, using upper pump plate for alignment
  • Put cap on fuel filler and rubber hose on hose barb. Pressure test with compressed air and soapy water and re-weld as necessary until all leaks stopped.
  • Paint entire fuel tank except for hose barb, top of fuel filler and cap.
Fuel Tank.png

Hydraulic Reservoir

  • Drawings: media:hyd_reservoir.pdf, media:reservoir.pdf
  • Drawings: media:reservoir.pdf, media:reservoir_assy.pdf
  • Cut Steel: 6" x 12" tube and 2 each: 1/4" x 6" x 12", 1/4" x 4" x 4" and 1/4" x 1" x 4"
  • Cut holes (drill small holes, torch large holes)
    • Check that the corresponding parts fit properly in the holes (they may need to be ground / filed a bit)
  • Grind tube ends square
  • Clean all edges for welding
  • Weld tank flanges and half coupling for suction port
  • Weld end plate to tank end nearest the sight gauge holes
    • See note below for welding end plates: "Hydraulic Reservoir and Fuel Tank"
  • Mount sight gauge
  • Weld remaining end plate (First check that sight gauge is installed!)
  • Plug all flange holes, drill a hole in the 1 1/2" cap for the suction port and plug with a tire stem valve. Pressure test with compressed air and soapy water and re-weld as necessary until all leaks have stopped.
  • Weld mounting brackets together (do not weld inside edge of brackets)
  • Weld brackets to tank (use 1/4" x 2" x 26" steel as spacer under brackets)
  • Weld bolts to tank (use top pump plate to align bolts)
  • Paint entire tank except for threads and sight gauge.

Hydraulic Reservoir.png

Engine Module

  • Cut plate: 8“ x 15 1/2“, grind edges
  • Torch and grind large holes
  • Drill small (5/16“) holes, grind slots
  • Paint plate, let dry
  • Bolt plate to engine
  • Bolt muffler to engine with gaskets between muffler and engine ports
  • Bolt muffler extension to muffler with 1 1/2" "U" bolt

Engine Module.png

  • Shaft Coupler
    • Cut both shaft couplings in half, set aside one half of each coupling
    • Insert alignment plug, clamp end-to-end with C-clamp and weld couplers together
      • Note: Touching coupling faces should be machined faces (not cut faces)
    • Remove plug (use hammer & blunt punch)
    • Let cool, then insert key into engine shaft slot, then secure coupling to engine shaft with set screw
    • Note that once engine is mated with pump, the shaft coupler should be checked to insure that it fully engages teeth of pump shaft. This may require loosening the set screw and sliding the coupler down - but don't let it rest against pump casing.

Shaft Coupling Detail

  • Note: The alignment of the shaft coupler must be precise. The plug aligns the couplers while welding. See the OSE order page for completed couplings.

Pump Module

  • Cut plates and angle iron
  • Torch large holes, drill small (5/16“) holes
  • Grind edges, test fit pump & bolts
  • Space angle iron evenly on 6“ plate as shown below, 1/4 from edges. Tackweld inside corner of angle iron, then outer corners
  • Weld outer and inner edges

Pump Module1.png

  • Stack pump plates as shown in diagram below (pay attention to 3/4" holes in larger plate)
  • Add 4 1/4" spacers between plates as shown
    • Note: Spacers should provide 1/8" standoff from other angle iron and have VERY perpendicular and smooth edges
  • Use two C-clamps to clamp plates securely to spacers - they should be directly inline with spacers
    • Precision note: Plates must be parallel else shaft may bind. Before welding, check that plates are spaced evenly.
  • Tackweld inside corners (do not weld spacers)
  • Weld inside and out, remove clamps & spacers

Pump Module2.png

  • Bolt pump to plate assembly
  • Install hosebarb on pump
  • Install elbow on pump loosely
  • Note: keep holes on pump plugged to prevent debris

Pump Module Final.png

  • Note: The alignment of the upper and lower pump plates are critical for proper shaft alignment. Completed pump brackets are available from the OSE Store.

Oil Cooler Module

  • Carefully unbox oil cooler
  • Wrap NPTM elbow threads with teflon tape
  • Screw NPTM ends of elbows into cooler, tighten so JIC elbow ends point as in illustration
  • Secure fan to cooler

Oil Cooler.png

Control Panel Module

  • Torch large holes, drill small holes
  • File key hole to fit switch
  • Grind all edges
  • Weld bracket for throttle
  • Install throttle and keyswitch
  • Install quick connectors using teflon tape

Control Panel front.png

Control Panel back.png

Frame Module

  • Cut angle iron, flat bar, rebar and expanded steel
  • Grind ends of angle iron at 45 degrees
  • Align and weld 4 “V“s from angle iron
  • Align and weld “V“s to form two squares
  • Weld two more pieces to the squares
  • Weld the two haves to form a cube
  • Weld the battery box and tank supports
  • Weld the expanded steel in place
  • Bend the rebar segments into "U" shaped hoist hooks
  • Weld the the hoist hooks and QA plates

PCVII Frame.png

Solenoid Module

  • Bend one cooler support to match holes on fuel tank
  • Mount solenoid on support braket (made above)

Solenoid Module.png

Solenoid Photo.png

Wiring Harness

  • Drawing (click for larger view)

Wiringharness.png

  • Photo

Wiringharnessphoto.png

  • Battery Terminals

  • Engine Connections

Final Assembly

  • Install Fuel Tank module in frame (fuel tank goes beside battery box)

Final Fuel Tank.png

  • Install Hydraulic Reservoir module in frame

Final Hyd Res.png

  • Install Pump module and Solenoid module

Final Pump.png

  • Install oil cooler and fan to expanded steel

Final Oil Cooler.png

  • Install hoses to connect hydraulics and tighten appropriately
  • Install Wiring Harness to key switch, connect to fan and solenoid (do not connect "+" battery connection yet)
  • Install Engine module:
    • Lower Engine Module gently until shaft coupling contacts pump shaft, rock/turn engine until shaft engages pump
    • Install 3/4" bolts / washers / nuts, securing engine plate to pump plate
    • Remove nut from right rear engine bolt, place black battery on bolt, replace nut and tighten
    • Connect electrical connector from wiring harness to engine
    • Connect fuel hose from fuel tank to engine
    • Connect cable from solenoid to starter and tighten carefully
  • Install battery in battery box
    • Connect "+" battery cable to battery

Final Assembly

Overview: File:PCVII Fabrication.pdf

Note: Welding Hydraulic Reservoir and Fuel Tank

Note on welding from Ben Horton: "The three "C's" of welding are clean, clean, clean. Tack the entire tank together, then after you clean the work pieces leave a gap between them about 1/6" and fixture the joints so that it is very uniform then weld down hill with minimal torch manipulation (mig). The next thing is to listen you will be able to hear the arc in side the tank as it penetrates. Remember watch the puddle not the arc. With 1/4" material you shouldn't have to stitch weld it but move from joint to joint opposite the one prior. Call me if you have questions." Results: Using above procedure, Marcin welded the fuel tank (1/4" steel, so easy on High-4, 70 wire speed, Millermatic 200) on first pass (except for filler cap, which is sheet metal)! That's a first, as I always had at least one pinhole leak, and about 8-10 at worst in prior production runs. For the end caps - grind edge + top and bottom around edge to 3/8" away from edge, with no factory scale on metal - just clean shiny metal. Grind edges of 6"x12" tube also 3/8" from edge. If cut by bandsaw (our case).

Fabrication

Hydraulic Sight Gauge


Power Cube Assembly Video Script

Steps for Instructional Assembly Video Script

Research

  • Mechanical shaft quick coupling patent - [1]

July 2014 - Structural Power Cube

The frame of the Structural Power Cube is designed for stacking of multiple power cubes. This documents is about the angle iron frame Power Cube for applications where only one or two Power Cubes are required. Here is the link to the Structural Power Cube:

Link: Structural Power Cube