Rototiller/Manufacturing Instructions/Pivot

From Open Source Ecology
Jump to: navigation, search

Overview

Pivot Weldment.PNG The frame hinge links the bucket to the tool holder frame.

You will be making two of these as there is both a left and right side that are mirrors of eachother, but use the same sub-components

Tools Required

Materials Required

TYPE SIZE QTY.
Flat 0.75" x 4" x 6" 2
Square Tubing 2.5" x 2.5" x 3/16"Thick x 12" 2
Hex Nut, Steel 0.75"-10 2

Parts List and Drawings

ITEM NO. PART NAME QTY.
1 Joint Plate 2
2 Large Tube 2
3 Steel Hex Nut 0.75"x10 2

Fabrication and Assembly Instructions

Assembly Name QTY.
Pivot Weldment Left 1
Pivot Weldment Right 1
  1. Cut piece parts as per part drawings
  2. Weld 3/4" nut onto square tubing centered on the 13/16" hole for both square tubings
  3. Weld square tubing to the Joint Plate as per the welded assembly drawings for the left and right side.