Rototiller/Manufacturing Instructions

From Open Source Ecology
Jump to: navigation, search


Rototiller
   Home  |  Research & Development  |  Bill of Materials  |  Manufacturing Instructions  |  User's Manual  |  User Reviews    Rototiller.png

The entire fabrication procedure is contained in a master PDF file - Pulverizer Full Fabrication Procedure.

Tools[edit]

Note that CAM files are available for the various mounting plates of the soil pulverizer. See Soil Pulverizer CAM files – bearing mounts and motor mount plates

Materials[edit]

  • For a materials list which is organized a little differently, see the Bill of Materials.

Overview[edit]

These pages provide instructions and information on manufacturing and assembling the Soil Pulverizer.

Note: All fabrication drawings are first draft and may contain errors. If you see any please add a note on the page for the correction.

Fabrication Steps[edit]

Complete all items in Parts Fabrication and then assemble them. Once the machine is assembled, you can paint it.

Parts Fabrication[edit]

The following steps can all be completed independently.

Assembly[edit]

Assembly

Paint[edit]

  • Cover the hydraulics and any other place that should not be painted.
  • Check all external surfaces for sharp edges and smooth with angle grinder.
  • Remove any surface rust with wire brush and / or sandpaper.
  • Apply a thorough coating of paint to all steel surfaces.
  • Allow 24 hours to dry before handling.