File list
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description |
|---|---|---|---|---|
| 16:25, 5 October 2019 | Simpleextruderspringbasebracket.stl (file) |  |
29 KB | Simple Extruder spring base bracket. Same dimensions as original measured part. Only modified filet to chamfer for the countersunk screw and the cylindrical hole for the spring holding bolt head. |
| 16:21, 5 October 2019 | Simpleextruderbearingbracket.stl (file) | |
44 KB | Simple Extruder filament feed bracket arm and bearing holder. Modified from original measurements to straighten the filament path. |
| 02:51, 5 October 2019 | Simple Extruder Assembly.fcstd (file) | |
376 KB | simple extruder assembly with NEMA 17 motor. no bolts, heater, or sensor. |
| 00:29, 2 September 2019 | Simpleextruderspringbasebracket.fcstd (file) | |
61 KB | |
| 00:26, 2 September 2019 | Simpleextruderbearingbracket.fcstd (file) | |
88 KB | |
| 00:22, 2 September 2019 | Simple extruder spring.png (file) |  |
36 KB | |
| 00:17, 2 September 2019 | Simpleextruderspring.fcstd (file) | |
8 KB | |
| 00:16, 2 September 2019 | Simple extruder nozzle.fcstd (file) | |
66 KB | |
| 00:14, 2 September 2019 | Heatbreak.fcstd (file) | |
17 KB | |
| 00:14, 2 September 2019 | Baseblock.fcstd (file) | |
24 KB | |
| 00:13, 2 September 2019 | Heaterblock.fcstd (file) | |
29 KB | |
| 23:55, 1 September 2019 | Simple extruder base bracket.png (file) |  |
27 KB | |
| 23:53, 1 September 2019 | Simple extruder bearing bracket.png (file) |  |
58 KB | |
| 23:51, 1 September 2019 | Simple extruder nozzle.png (file) |  |
41 KB | |
| 23:50, 1 September 2019 | Simple extruder heat break.png (file) |  |
22 KB | |
| 23:49, 1 September 2019 | Simple extruder base block.png (file) |  |
17 KB | |
| 23:48, 1 September 2019 | Simple extruder heat block.png (file) |  |
25 KB | |
| 22:40, 4 July 2019 | 2axismotorpiece.fcstd (file) | |
8 KB | added spreadsheet for easier copying & editing of values. editable. |
| 19:29, 4 April 2019 | ID frame corner 0.75in.stl (file) | |
63 KB | D3D Plastic Inside Diameter Fitting Frame Corner. 3D Printable STL. |
| 19:28, 4 April 2019 | ID frame corner 0.75in.fcstd (file) | |
224 KB | D3D Plastic Inside Diameter Fitting Frame Corner. editable. Freecad 0.17 |
| 19:23, 4 April 2019 | ID frame corner 0.75in.png (file) |  |
14 KB | D3D Plastic Inside Diameter Fitting Frame Corner |
| 20:31, 22 March 2019 | Power Cube v19.02.fcstd (file) | |
122 KB | 16in deep with the hydraulic filter. |
| 05:39, 9 March 2019 | GC Bench Seat.fcstd (file) | |
60 KB | added more angle braces. editable. |
| 01:22, 27 February 2019 | D3D PVC mount clamp.stl (file) | |
34 KB | narrowed gap to ~1mm this gives a stronger bolt face for clamping. |
| 01:22, 27 February 2019 | PVC mount clamp.fcstd (file) | |
61 KB | narrowed gap to ~1mm this gives a stronger bolt face for clamping. |
| 21:20, 22 February 2019 | Golf Cart Bench Seat.png (file) |  |
15 KB | golf cart bench seat |
| 00:15, 20 November 2018 | Pipe frame corner 0.75in.stl (file) | |
121 KB | fixed size. 3/4" PVC (1.05" OD) |
| 00:15, 20 November 2018 | Frame pipe 0.75in x 10.5in.stl (file) | |
25 KB | fixed size. 3/4" PVC (1.05" OD) |
| 23:51, 19 November 2018 | PVC pipe 0.75in x 10.5in.fcstd (file) | |
3 KB | fixed size. 3/4" PVC (1.05" OD) |
| 23:50, 19 November 2018 | PVC corner 0.75in.fcstd (file) | |
8 KB | fixed size. 3/4" PVC (1.05" OD) |
| 06:34, 5 November 2018 | D3D Mini PVC Full Assembly.fcstd (file) | |
88 KB | simplified most parts for experimenting with position adjustments |
| 01:03, 5 November 2018 | D3D PVC Mini Frame.png (file) |  |
30 KB | D3D PVC Mini Frame 12" cube |
| 01:00, 5 November 2018 | PVC 0.75in x 10.5in pipe.png (file) |  |
8 KB | PVC 3/4" x ~10.5" pipe for D3D PVC Mini frame |
| 00:47, 5 November 2018 | PVC 0.75in corner.png (file) |  |
29 KB | PVC 3/4" corner for PVC frames |
| 19:05, 2 November 2018 | PSU 12V 7A.fcstd (file) | |
3 KB | laptop style Power Supply Unit 12V 7A for D3D PVC Mini |
| 04:20, 17 October 2018 | Power Cube V18.01 Frame.png (file) |  |
114 KB | Power Cube v18.01 Frame |
| 01:05, 17 October 2018 | Power Cube v18.01.png (file) |  |
173 KB | Power Cube v18.01 |
| 00:23, 17 October 2018 | Power Cube v17.11.png (file) |  |
184 KB | Power Cube v17.11 |
| 22:35, 27 May 2018 | PC v17.11 engine pump module.fcstd (file) | |
373 KB | added starter pull cord handle. editable. |
| 21:58, 27 May 2018 | SAE 12 to 0.75in NPT adapter.fcstd (file) | |
5 KB | SAE_12_to_0.75in_NPT_adapter. simple. |
| 18:52, 22 May 2018 | SAE 16 to 0.75in NPT adapter.fcstd (file) | |
5 KB | simple. |
| 18:04, 22 May 2018 | SAE 10 to NPT 0.5in adapter.fcstd (file) | |
6 KB | simple. |
| 21:06, 16 May 2018 | Powercube v17.11.fcstd (file) | |
1.32 MB | corrected valves. assembly editable. |
| 21:04, 16 May 2018 | Ball Valve 0.75in NPT (file) | |
13 KB | corrected size. simple. |
| 04:54, 16 May 2018 | Powercubeframe.fcstd (file) | |
28 KB | moved engine mount holes and notch further. simple. |
| 02:46, 10 May 2018 | Power Cube v17.11 Frame.png (file) |  |
42 KB | Frame Module for Power Cube v17.11 |
| 04:12, 15 April 2018 | Power Cube v17.08.png (file) |  |
135 KB | Power Cube v17.08 CAD |
| 00:21, 3 April 2018 | 0.5in NPT elbow.fcstd (file) | |
4 KB | simple. |
| 02:04, 26 March 2018 | 0.75in NPT elbow.fcstd (file) | |
4 KB | 3/4" NPT elbow. simple. |
| 01:37, 12 March 2018 | PC v17.11 Tank FIller Cap.fcstd (file) | |
4 KB | simple. |
