All public logs
Combined display of all available logs of Open Source Ecology. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
(newest | oldest) View (newer 50 | older 50) (20 | 50 | 100 | 250 | 500)- 16:25, 5 October 2019 AbeAnderson (talk | contribs) uploaded File:Simpleextruderspringbasebracket.stl (Simple Extruder spring base bracket. Same dimensions as original measured part. Only modified filet to chamfer for the countersunk screw and the cylindrical hole for the spring holding bolt head.)
- 16:21, 5 October 2019 AbeAnderson (talk | contribs) uploaded File:Simpleextruderbearingbracket.stl (Simple Extruder filament feed bracket arm and bearing holder. Modified from original measurements to straighten the filament path.)
- 02:51, 5 October 2019 AbeAnderson (talk | contribs) uploaded File:Simple Extruder Assembly.fcstd (simple extruder assembly with NEMA 17 motor. no bolts, heater, or sensor.)
- 22:57, 22 September 2019 AbeAnderson (talk | contribs) uploaded File:Simple extruder assembly.png (D3D Simple Extruder Assembly)
- 00:29, 2 September 2019 AbeAnderson (talk | contribs) uploaded File:Simpleextruderspringbasebracket.fcstd
- 00:26, 2 September 2019 AbeAnderson (talk | contribs) uploaded File:Simpleextruderbearingbracket.fcstd
- 00:22, 2 September 2019 AbeAnderson (talk | contribs) uploaded File:Simple extruder spring.png
- 00:17, 2 September 2019 AbeAnderson (talk | contribs) uploaded File:Simpleextruderspring.fcstd
- 00:16, 2 September 2019 AbeAnderson (talk | contribs) uploaded File:Simple extruder nozzle.fcstd
- 00:14, 2 September 2019 AbeAnderson (talk | contribs) uploaded File:Heatbreak.fcstd
- 00:14, 2 September 2019 AbeAnderson (talk | contribs) uploaded File:Baseblock.fcstd
- 00:13, 2 September 2019 AbeAnderson (talk | contribs) uploaded File:Heaterblock.fcstd
- 23:55, 1 September 2019 AbeAnderson (talk | contribs) uploaded File:Simple extruder base bracket.png
- 23:53, 1 September 2019 AbeAnderson (talk | contribs) uploaded File:Simple extruder bearing bracket.png
- 23:51, 1 September 2019 AbeAnderson (talk | contribs) uploaded File:Simple extruder nozzle.png
- 23:50, 1 September 2019 AbeAnderson (talk | contribs) uploaded File:Simple extruder heat break.png
- 23:49, 1 September 2019 AbeAnderson (talk | contribs) uploaded File:Simple extruder base block.png
- 23:48, 1 September 2019 AbeAnderson (talk | contribs) uploaded File:Simple extruder heat block.png
- 22:40, 4 July 2019 AbeAnderson (talk | contribs) uploaded a new version of File:2axismotorpiece.fcstd (added spreadsheet for easier copying & editing of values. editable.)
- 22:11, 4 July 2019 AbeAnderson (talk | contribs) uploaded a new version of File:2axismotorpiece.fcstd (split sketch for the clamshell half. editable.)
- 21:34, 4 July 2019 AbeAnderson (talk | contribs) uploaded a new version of File:2axismotorpiece.fcstd (added symmetrical sketch constraint. editable.)
- 19:57, 11 May 2019 AbeAnderson (talk | contribs) uploaded a new version of File:Xy bracket.fcstd (simple.)
- 19:56, 11 May 2019 AbeAnderson (talk | contribs) uploaded a new version of File:Xy bracket.fcstd (made top holes symmetrical. editable.)
- 19:29, 4 April 2019 AbeAnderson (talk | contribs) uploaded File:ID frame corner 0.75in.stl (D3D Plastic Inside Diameter Fitting Frame Corner. 3D Printable STL.)
- 19:28, 4 April 2019 AbeAnderson (talk | contribs) uploaded File:ID frame corner 0.75in.fcstd (D3D Plastic Inside Diameter Fitting Frame Corner. editable. Freecad 0.17)
- 19:23, 4 April 2019 AbeAnderson (talk | contribs) uploaded File:ID frame corner 0.75in.png (D3D Plastic Inside Diameter Fitting Frame Corner)
- 20:31, 22 March 2019 AbeAnderson (talk | contribs) uploaded a new version of File:Power Cube v19.02.fcstd (16in deep with the hydraulic filter.)
- 05:39, 9 March 2019 AbeAnderson (talk | contribs) uploaded a new version of File:GC Bench Seat.fcstd (added more angle braces. editable.)
- 01:00, 9 March 2019 AbeAnderson (talk | contribs) uploaded a new version of File:GC Bench Seat.fcstd (full height angled bench supports. spreadsheet not working. editable.)
- 01:22, 27 February 2019 AbeAnderson (talk | contribs) uploaded a new version of File:D3D PVC mount clamp.stl (narrowed gap to ~1mm this gives a stronger bolt face for clamping.)
- 01:22, 27 February 2019 AbeAnderson (talk | contribs) uploaded a new version of File:PVC mount clamp.fcstd (narrowed gap to ~1mm this gives a stronger bolt face for clamping.)
- 22:28, 26 February 2019 AbeAnderson (talk | contribs) uploaded a new version of File:D3D PVC mount clamp.stl (added ~2mm gap for more clamping force.)
- 22:27, 26 February 2019 AbeAnderson (talk | contribs) uploaded a new version of File:PVC mount clamp.fcstd (added ~2mm gap for more clamping force.)
- 05:58, 23 February 2019 AbeAnderson (talk | contribs) uploaded a new version of File:GC Bench Seat.fcstd (reduced stock metal flats to 2in wide, straightened back and removed some supports for to redesign it.)
- 05:42, 23 February 2019 AbeAnderson (talk | contribs) uploaded File:Power Cube v19.02.fcstd (Power Cube v19.02 Hydraulic Tank)
- 21:20, 22 February 2019 AbeAnderson (talk | contribs) uploaded File:Golf Cart Bench Seat.png (golf cart bench seat)
- 21:16, 22 February 2019 AbeAnderson (talk | contribs) uploaded File:GC Bench Seat.fcstd (golf cart bench seat 4ft wide x 18in deep x 17in seat height + 18in back.)
- 05:23, 13 February 2019 AbeAnderson (talk | contribs) uploaded a new version of File:PVC Mount Clamp.png (3/4in PVC clamp for D3D PVC.)
- 05:19, 13 February 2019 AbeAnderson (talk | contribs) uploaded File:D3D PVC mount clamp.stl (3/4in PVC mount clamp for D3D PVC, for 30mm long bolt to axis', rounded hex bolt recesses.)
- 05:11, 13 February 2019 AbeAnderson (talk | contribs) uploaded a new version of File:PVC mount clamp.fcstd (asymmetrical version for 30mm bolt length. editable.)
- 02:05, 30 January 2019 AbeAnderson (talk | contribs) uploaded a new version of File:PVC mount clamp.fcstd (Thicker split clamp symmetrical rounded corner. ~1.82" bolt length without nut catcher recesses. 2.64" x 2.05" square. for 3/4" PVC pipe.)
- 05:45, 27 November 2018 AbeAnderson (talk | contribs) uploaded a new version of File:PVC mount clamp.fcstd (Collar style clamp symmetrical half. editable.)
- 00:15, 20 November 2018 AbeAnderson (talk | contribs) uploaded a new version of File:Pipe frame corner 0.75in.stl (fixed size. 3/4" PVC (1.05" OD))
- 00:15, 20 November 2018 AbeAnderson (talk | contribs) uploaded a new version of File:Frame pipe 0.75in x 10.5in.stl (fixed size. 3/4" PVC (1.05" OD))
- 23:51, 19 November 2018 AbeAnderson (talk | contribs) uploaded a new version of File:PVC pipe 0.75in x 10.5in.fcstd (fixed size. 3/4" PVC (1.05" OD))
- 23:50, 19 November 2018 AbeAnderson (talk | contribs) uploaded a new version of File:PVC corner 0.75in.fcstd (fixed size. 3/4" PVC (1.05" OD))
- 04:00, 15 November 2018 AbeAnderson (talk | contribs) uploaded a new version of File:PVC mount clamp.fcstd (C shaped snap on boltless clamp design variation.)
- 04:53, 13 November 2018 AbeAnderson (talk | contribs) uploaded a new version of File:PVC mount clamp.fcstd (changed general shape and hole sizes to match other D3D parts.)
- 02:58, 10 November 2018 AbeAnderson (talk | contribs) uploaded File:Frame pipe 0.75in x 10.5in.stl (STL mesh 3/4" x 10.5" pipe section for D3D Mini PVC style pipe frame.)
- 02:53, 10 November 2018 AbeAnderson (talk | contribs) uploaded File:Pipe frame corner 0.75in.stl (STL mesh corner for printing & building PVC style frames 3/4" pipe diameter.)