Steam Engine Build/Cylinder Assembly

From Open Source Ecology
Jump to: navigation, search

Main > Energy > Steam Engine


Steam Engine Build Instructions

Elements

The cylinder assembly consists of the following elements:

  • Cylinder Case
  • Cylinder Liner
  • Cylinder Head with Valve Seats
  • Cylinder Head with Mounting Bracket
  • Exhaust Plenum

Drawing

Instructions

Create the cylinder assembly as follows:

  1. Purchase a cylinder liner with a 4" inch bore. Modify it as in Steam Engine Build/Cylinder Liner Modifications.
  2. Fabricate a cylinder case using instructions in Steam Engine Build/Cylinder Case.
  3. Fabricate a cylinder head using instructions in Steam Engine Build/Cylinder Valve Seats.
  4. Fabricate a cylinder head with mounting bracket using instructions in Steam Engine Build/Cylinder End Mount.
  5. Fabricate a cylinder mounting bracket using instructions in Steam Engine Build/Cylinder Mounting Bracket.
  6. Fabricate both halves of the exhaust plenum using instructions in Steam Engine Build/Exhaust Plenum.
  7. Insert the cylinder liner into the cylinder case. Make sure that all holes are aligned properly.
  8. Attached cylinder head with valve seats to cylinder case with two half-inch bolts using half-inch nuts.
  9. Attach the exhaust plenum around the cylinder case and secure it with (TBD) bolts.

Note: It may be easier to defer drilling of the exhaust holes in the liner and case until both are nearly complete. Put a cylindrical wooden form inside the liner, put the form and liner inside the case and then drill all four exhaust holes.