Steam Engine Design/Piston Valve

From Open Source Ecology
Jump to: navigation, search

Main > Energy > Steam Engine


Steam Engine Design/Valves

One of the problems with the bump valve (and some other kinds of steam engine valves) is that spring used hold the valve closed heats up from the steam around it. Over time, this weakens the spring (annealing, likely) causing either to fail or lose its stiffness and ability to keep the valve closed. A piston valve eliminates that problem by doing away with the spring.

Piston-Valve.png

While the piston valve solves the problem of spring failure, it introduces another problem. The valve enters the cylinder cap through the valve seat as the piston head moves past top dead center. It must enter the valve seat precisely else chipping of the valve or the valve seat is likely. Furthermore, the fit of the valve in the cylinder cap must be tight or steam will leak through it.

Design-3-A.png

Design-3-B.png

Design-3-C.png

Personal tools
Namespaces

Variants
Actions
Navigation
Open Source Ecology
Toolbox
Topics