Open Source Drill Press: Prototype 1
Fabrication optimization for The Liberator open source CEB press involves designing and deploying four, heavy duty, open source fabrication tools: (1) drill press for drilling 1″ and larger holes directly in metal without pre-drilling; (2) 120 ton...
Open Source Laser Cutter
The following is a project from another group, but it is close to our goals. Chip in if you want to see this happen – a 100W open source, laser cutter for under $5k. If successful, this project will be a direct contribution to RepLab and the Global...
Initial Steps to the Open Source Multimachine
You may have read the proposition of turning the LifeTrac tractor auger to a lathe in this post. Here are the initial results of putting together an open source lathe, plus drill and mill combination. The bill of materials is: Total – $800 for lathe,...
RepLab – the Open Source Fab Lab
Many of you may have heard of the MIT Fab Lab – a mini factory where you can make just about anything. If you have $100k to spend, you can get one for your home. What if we reduce the price of this toolset by a factor of 10? While we are at it,...
