Thermal Dynamics Cutmaster 52

From Open Source Ecology
(Redirected from Cutmaster 52)
Jump to: navigation, search

http://www.weldingsuppliesfromioc.com/thermal-dynamics-cutmaster-52-plasma-cutter-1-5130-1

Cutmasterspeed.jpg

  • Operating Manual - [1]
  • Service Manual - [2]

Troubleshooting

Short Torch Parts Life:

  1. Oil or moisture in air source.
  2. Exceeding system capability (material too thick).
  3. Excessive pilot arc time
  4. Gas pressure too low.
  5. Improperly assembled torch.
  6. Non - Genuine Thermal Dynamics parts used