Open Source Hydronic System

From Open Source Ecology
(Redirected from Hydronic Heating)
Jump to: navigation, search

Basics

  • OSE's Open Source, Modular Hydronic System in use by OBI
  • Currently is focused only on heating (Double check this)
  • Uses the Hydronic Stove as a heat source
    • Is solar thermal water panels also included yet (need to look/ask around)

Potential Future Areas Of Work

On Cooling Addition

On Geothermal Heat Pump integration

Combining the system with a hot water storage tank

  • All heat (from the Hydronic Stove, a solar thermal panel, waste heat, etc) is "fed in" to a tank of the working fluid
  • This can then be used directly, or be used to heat air, water, or another fluid
  • Also may allow for some Thermal Energy Storage
  • Heat exchangers, and most likely custom tanks would make this quite complex
    • It may help with modularity, compact-ness, and efficiency

Open Source Hydronic Design

edit

3D With Explosions and Part Links

Note: wiki does not support http, but you can still see this at http://3dcontent.be/hydronics/hydronics.html. Wait a little for it to load.

Hydronics Install Prior to Stove Connection

Simple hydronic circuit for both 1/2" in-floor lines (1000 feet in a single zone) + a wall radiator outlet (3/4" tube) using oxygen barrier PEX. Parts cost of $500 approximately for the hydraulics control panel - $100 pump, $100 divider valve, fittings, gauges.

Hydronics.jpg

Prior to In-Floor Tubing Connection

Hydronics2.jpg

In-Ground Heat Tubing Install

Hydronics3.jpg

Prepare to Put in Wood Floor

Floor will be stained 1"x4" lumber on 2"x4" rails

Hydronics35.jpg

Product!

Warm feet.

Hydronics4.jpg

Discuss This!

Industry Standards

  • $4600 - 20 year warranty - Glenwood 7020 - [1]
  • $3600 - 5 year warranty - says Gasifier type - water heat exchange medium - Slovak import - [2]
  • $3500 - Biasi - [3] - Remaining exhaust heat is given-up in a wide finned, self-cleaning passageway before exiting the boiler.

Internal Links

External Links