CEB Press/Manufacturing Instructions/Arms - secondary

From Open Source Ecology
Jump to: navigation, search

Main > Housing and construction > CEB Press > CEB press building instructionsSecondaryarms.jpg


2ndarmweldover.png

Part Information

The secondary arms connect the primary arms to the legs to support the structure.

Tools Required

  • Cutting Torch
  • Angle Grinder
  • Welder

Materials Required

  • [2] Steel Angle 4" A x 6" B x 1/2" Thickness x 72" Length
  • Steel Plate 3" x 3" x 1/2"
  • [8] Leg Holders

Fabrication Steps

  • Punch the holes in each arm. They are symmetrical.
  • Place the leg holders in their proper locations.
  • They go on the 4" side of the angle.
  • They are symmetric. See Diagram for placement on each end.
  • Make sure they are square with the angle iron and centered vertically.
  • Weld them to the angle.