File list
This special page shows all uploaded files.
Date | Name | Thumbnail | Size | Description |
---|---|---|---|---|
22:56, 21 April 2014 | MachineSettings.png (file) | 79 KB | ||
22:55, 21 April 2014 | BasicSettings.png (file) | 41 KB | ||
22:51, 21 April 2014 | AdvancedSettings.png (file) | 34 KB | ||
16:38, 20 April 2014 | AO101TestPrint.gcode (file) | 613 KB | This is the gcode that can be loaded into pronterface to test the AO101 (little lulz) downloaded from https://www.lulzbot.com/support/downloads on 4/19/14 | |
16:30, 20 April 2014 | NewKaptonLulz.jpg (file) | 263 KB | ||
16:25, 20 April 2014 | Hydra New spool.jpg (file) | 301 KB | ||
16:24, 20 April 2014 | Hydra Spool Adjust.jpg (file) | 265 KB | ||
16:23, 20 April 2014 | TAZ Spool Adjust2.jpg (file) | 253 KB | ||
16:23, 20 April 2014 | TAZ Spool Adjustment.jpeg (file) | 248 KB | ||
23:42, 13 March 2014 | Curabucket.png (file) | 85 KB | ||
21:40, 13 March 2014 | Cura TAZ ABS 35.ini (file) | 4 KB | Medium speed configuration file for ABS plastic with a .35 mm nozzle on a LulzBot Taz - slice files with Cura! | |
19:57, 13 March 2014 | Printablebucketthickenedwalls fixed.stl (file) | 554 KB | A model of the soil mixer's bucket, altered in Blender and fixed in NetFabb | |
19:54, 13 March 2014 | BenSoilMixeruntitled.stl (file) | 874 KB | The STL exported by Sketchup using the CAM Files Protocol | |
19:51, 13 March 2014 | BenSoilMixer.skp (file) | 2.21 MB | The Sketchup of the Soil Mixer Bucket Ben developed in SketchUp, updated March 13th. | |
16:27, 13 March 2014 | Singletine6mm.stl (file) | 41 KB | 3D model ready to print (needs to be sliced, printed with supports) of Soil Mixer's tines | |
07:46, 13 March 2014 | 3DOSE.jpg (file) | 2.62 MB | ||
07:40, 13 March 2014 | Crackedplaster4.jpg (file) | 2.44 MB | ||
07:28, 13 March 2014 | Crackedplaster3.jpg (file) | 2.41 MB | ||
07:22, 13 March 2014 | Crackedplaster2.jpg (file) | 2.37 MB | ||
07:15, 13 March 2014 | Crackedplaster1.jpg (file) | 2.44 MB | microcracks on east wall of hablab after plastering job gone awry. | |
06:44, 13 March 2014 | 3D Print of Tines.jpeg (file) | 1,003 KB | Printed some model tines for the Soil Mixer / Pulverizer. | |
02:53, 13 March 2014 | Microhousesynth.jpg (file) | 80 KB | Just a little photosynth panorama on 11 March 2014. | |
02:45, 13 March 2014 | Coltenprinting.jpg (file) | 175 KB | Just a good candid shot, working at the Printer desk in the HabLab, 12 March 2014. | |
02:36, 13 March 2014 | UltimakerPrinting.jpg (file) | 2.66 MB | March 11th photo of the first Ultimaker print after re-assembling. Bed needs to be leveled, but was otherwise running smoothly. | |
02:20, 13 March 2014 | Hablabsynth.jpg (file) | 2.25 MB | A panaroma of the HabLab during whitewashing taken March 11, 2014 Created with Microsoft Photosynth |