File list
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description |
|---|---|---|---|---|
| 20:14, 29 July 2017 | SA 3.fcstd (file) |  |
81 KB | Lyman Filament Extruder Sub Assembly 3, spool holder non motor side. This is the mirrored spool holder, 30mm M4 bolt, bearing, and part and and b of the spool pulley. unpositioned relative to the rest of the assembly. |
| 17:53, 29 July 2017 | LFS WOOD DOWEL BIRCH.fcstd (file) | |
2 KB | Generated a cylinder. Made in 10" because that is the width of the board the device is mounted on. Will probably be bought in a foot length and cut down. |
| 19:57, 22 July 2017 | CEB Rib 1.fcstd (file) | |
158 KB | CEB Rib with soil block removed. There are artifact lines from the booleaon operation that I don't understand. |
| 20:40, 7 July 2017 | LFX M4 Bolts.fcstd (file) | |
29 KB | |
| 20:39, 7 July 2017 | LFX Washers half inch.fcstd (file) | |
5 KB | |
| 20:35, 7 July 2017 | LFX Thrust Bearing half inch.fcstd (file) | |
5 KB | LFX thrust bearing half inch |
| 16:54, 6 July 2017 | 61 Part 50 template.fcstd (file) | |
12 KB | drilling template for Lyman Filament Extruder phenolic insulator block |
| 16:31, 6 July 2017 | 62 Part 51 template.fcstd (file) | |
7 KB | flange drilling template simplified |
| 05:18, 1 June 2017 | STL 15 SPOOL COLLAR 10mm.stl (file) | |
64 KB | |
| 05:18, 1 June 2017 | STL 14 COLLAR.stl (file) | |
62 KB | |
| 05:18, 1 June 2017 | STL 13 COG MOTOR SHAFT 4mm.stl (file) | |
63 KB | |
| 05:17, 1 June 2017 | STL 12 PULLER COG.stl (file) | |
44 KB | |
| 05:17, 1 June 2017 | STL 11 SPOOL PULLEY B.stl (file) | |
85 KB | |
| 05:17, 1 June 2017 | STL 10 SPOOL PULLEY A.stl (file) | |
112 KB | |
| 05:17, 1 June 2017 | STL 9 STANDOFF.stl (file) | |
41 KB | |
| 05:17, 1 June 2017 | STL 8 PULLER BRKT RT.stl (file) | |
66 KB | |
| 05:16, 1 June 2017 | STL 7 PULLER BRKT LT.stl (file) | |
57 KB | |
| 05:16, 1 June 2017 | STL 6 PULLER MOTOR BRKT.stl (file) | |
75 KB | |
| 05:16, 1 June 2017 | STL 5 LOOP STAND.stl (file) | |
55 KB | |
| 05:16, 1 June 2017 | STL 4 SWT WIRE GUIDE.stl (file) | |
1 KB | |
| 05:16, 1 June 2017 | STL 3 SPOOL HOLDER BRKT.stl (file) | |
72 KB | |
| 05:16, 1 June 2017 | STL 2 SPOOL CYL.stl (file) | |
67 KB | |
| 05:15, 1 June 2017 | STL 1 SPOOL DISC.stl (file) | |
139 KB | |
| 05:12, 1 June 2017 | STL 15 SPOOL COLLAR 10mm.jpg (file) |  |
28 KB | |
| 05:12, 1 June 2017 | STL 14 COLLAR.jpg (file) |  |
29 KB | |
| 05:12, 1 June 2017 | STL 13 COG MOTOR SHAFT 4mm.jpg (file) |  |
36 KB | |
| 05:11, 1 June 2017 | STL 12 PULLER COG.jpg (file) |  |
32 KB | |
| 05:09, 1 June 2017 | STL 5 LOOP STAND.jpg (file) |  |
45 KB | |
| 05:09, 1 June 2017 | STL 4 SWT WIRE GUIDE.jpg (file) |  |
36 KB | |
| 05:03, 1 June 2017 | 69 V6 CASE 11-8-15.stl (file) | |
281 KB | |
| 05:03, 1 June 2017 | 68 V6 CASE 11-5-15.stl (file) | |
291 KB | |
| 05:02, 1 June 2017 | 67 TOP PART OF EXTRUDER CASE.stl (file) | |
89 KB | |
| 05:02, 1 June 2017 | 66 TEST HOPPER 2.stl (file) | |
73 KB | |
| 05:01, 1 June 2017 | 64 Part 49 funnel.stl (file) | |
82 KB | |
| 05:00, 1 June 2017 | 63 Part 48 H hopper.stl (file) | |
1 MB | |
| 05:00, 1 June 2017 | 62 Part 51 template.stl (file) | |
121 KB | |
| 04:59, 1 June 2017 | 61 Part 50 template.stl (file) | |
40 KB | |
| 04:55, 1 June 2017 | 60 Part 45 hopper.stl (file) | |
71 KB | |
| 04:54, 1 June 2017 | 59 Part 44 hopper.stl (file) | |
991 KB | |
| 04:54, 1 June 2017 | 58 Part 43 hopper.stl (file) | |
47 KB | |
| 04:53, 1 June 2017 | 57 Part 41 box.stl (file) | |
82 KB | |
| 04:53, 1 June 2017 | 56 Part 40 box.stl (file) | |
10 KB | |
| 04:52, 1 June 2017 | 55 Part 39 box.stl (file) | |
232 KB | |
| 04:51, 1 June 2017 | 54 Part 38 box.stl (file) | |
221 KB | |
| 04:51, 1 June 2017 | 53 Part 37 box.stl (file) | |
14 KB | |
| 04:50, 1 June 2017 | 52 Part 36 box.stl (file) | |
684 bytes | |
| 04:50, 1 June 2017 | 51 Part 35 box.stl (file) | |
33 KB | |
| 04:48, 1 June 2017 | 50 Part 34 boc.stl (file) | |
12 KB | |
| 04:48, 1 June 2017 | 49 Part 33 box.stl (file) | |
24 KB | |
| 04:47, 1 June 2017 | 48 Part 32 box.stl (file) | |
12 KB |
