File list
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description |
|---|---|---|---|---|
| 10:49, 12 December 2019 | D3DS idler screwdown.stl (file) |  |
81 KB | |
| 10:49, 12 December 2019 | D3DS idler screwdown.fcstd (file) | |
182 KB | |
| 10:45, 12 December 2019 | D3DS idler screwdown.png (file) |  |
47 KB | |
| 10:39, 12 December 2019 | D3DS motor side screwdown.stl (file) | |
139 KB | |
| 10:37, 12 December 2019 | D3DS motor side screwdown.fcstd (file) | |
242 KB | |
| 10:36, 12 December 2019 | D3DS motor side screwdown.png (file) |  |
21 KB | |
| 07:17, 3 December 2019 | Idler belt wheel.stl (file) | |
127 KB | |
| 07:16, 3 December 2019 | Idler belt wheel.fcstd (file) | |
13 KB | |
| 07:13, 3 December 2019 | Idler belt wheel.png (file) |  |
21 KB | |
| 12:18, 2 December 2019 | Motorwithclip big.png (file) |  |
11 KB | motor piece with clip for 1" rods z-axis |
| 12:13, 2 December 2019 | Idlerwithclip big.png (file) |  |
9 KB | idler with clip for 1" rods z-axis |
| 12:06, 2 December 2019 | Idlerwithclip big.fcstd (file) | |
94 KB | idler with clip for 1" rods z-axis |
| 10:39, 2 December 2019 | Motorwithclip big.fcstd (file) | |
231 KB | motor with clip for the z-axis |
| 09:54, 26 November 2019 | Fl 205 cut of solenoid.fcstd (file) | |
63 KB | electromagnetic valve to open and close the acetylene and oxygen to the cut torch. |
| 09:54, 26 November 2019 | Fl 205 cut of solenoid.png (file) |  |
13 KB | electromagnetic valve to open and close the acetylene and oxygen to the cut torch. |
| 09:44, 26 November 2019 | Igniter.png (file) |  |
9 KB | igniter for the torch table |
| 09:44, 26 November 2019 | Igniter.fcstd (file) | |
50 KB | igniter for the torch table |
| 08:03, 25 November 2019 | Torch table assembly v19 10.png (file) |  |
33 KB | |
| 22:25, 23 November 2019 | D3DS motor side high screwdown.png (file) |  |
24 KB | Elevated motor side piece for Y-axis |
| 22:23, 23 November 2019 | D3DS idler high screwdown.png (file) |  |
19 KB | Elevated idler piece for Y-axis |
| 21:44, 23 November 2019 | Cnc torch carriage v19 10.fcstd (file) | |
818 KB | wider belt passage |
| 23:29, 21 November 2019 | Cnc torch half carriage v19 10.stl (file) | |
71 KB | Half carriage for auto alignment of the Y-axis. |
| 23:27, 21 November 2019 | Cnc torch half carriage v19 10.fcstd (file) | |
50 KB | Half carriage for auto alignment of the Y-axis. |
| 23:20, 21 November 2019 | Cnc torch half carriage v19 10.png (file) |  |
12 KB | |
| 17:34, 19 November 2019 | Cnc peg 15mm belt v19 10.stl (file) | |
2 KB | |
| 17:34, 19 November 2019 | Cnc peg 15mm belt v19 10.fcstd (file) | |
12 KB | |
| 17:33, 19 November 2019 | Cnc peg 15mm belt v19 10.png (file) |  |
6 KB | |
| 00:07, 19 November 2019 | CNC Torch 1708 motorside.stl (file) | |
149 KB | |
| 23:30, 17 November 2019 | Cnc torch idler v19 10.stl (file) | |
70 KB | |
| 23:22, 17 November 2019 | Cnc torch idler v19 10.fcstd (file) | |
235 KB | |
| 23:15, 17 November 2019 | Cnc torch idler v19 10.png (file) |  |
12 KB | |
| 18:45, 17 November 2019 | Cnc torch carriage v19 10.png (file) |  |
19 KB | fixed a major design flaw |
| 09:38, 12 November 2019 | D3DS motor bracket.png (file) |  |
17 KB | Motor piece with bracket for the x and z-axis on the D3D simple (universal) |
| 09:37, 12 November 2019 | D3DS motor bracket.stl (file) | |
152 KB | Motor piece with bracket for the x and z-axis on the D3D simple (universal) |
| 04:36, 12 November 2019 | D3DS motor bracket x axis.png (file) |  |
13 KB | Motor piece with bracket specifically for the x_axis of the D3D simple (universal) |
| 02:11, 12 November 2019 | D3DS motor bracket x axis.stl (file) | |
109 KB | Motor piece with bracket specifically for the x_axis of the D3D simple (universal) |
| 02:11, 12 November 2019 | D3DS motor bracket x axis.fcstd (file) | |
109 KB | Motor piece with bracket specifically for the x_axis of the D3D simple (universal) |
| 21:53, 9 November 2019 | Carriage motor merge.stl (file) | |
378 KB | corrected belt teeth positioning and right printing position |
| 21:46, 9 November 2019 | Carriage halfcarriage merge.stl (file) | |
493 KB | repositioning of the half carriage for more x-axis carriage movement. |
| 06:05, 8 November 2019 | Motor side with bracket.fcstd (file) | |
21 KB | |
| 16:24, 7 November 2019 | Integrated carriage.fcstd (file) | |
265 KB | The motor space of bracket is now 1mm wider. |
| 03:18, 7 November 2019 | Integrated carriage.jpg (file) |  |
42 KB | easier to print and better motor support |
| 00:22, 20 October 2019 | CoilWinder V1.2 small.jpg (file) |  |
34 KB | An open source 3D printed coil winder. |
| 21:51, 7 October 2019 | Fc2blend2web addons scripts.zip (file) | |
149 KB | fixed the tabs and spaces inconsistencies |
| 23:21, 30 September 2019 | Coil prep.jpg (file) |  |
128 KB | Preparing the coil winding. |
| 23:14, 30 September 2019 | Rotor disk.jpg (file) |  |
153 KB | The steps for making a rotor disk |
| 21:30, 20 September 2019 | Motor v02 pieces.JPG (file) |  |
141 KB | first 3D print test for the Open Source Modular Axial Flux Motor v02 |
| 23:12, 15 September 2017 | Merge or assembly.jpg (file) |  |
216 KB | |
| 20:30, 6 September 2017 | OSE webGL.jpg (file) |  |
40 KB | |
| 15:13, 24 August 2017 | Nut lock 7 16 simple.fcstd (file) | |
22 KB |
