File list
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description |
|---|---|---|---|---|
| 07:41, 19 December 2013 | Ose-cnc-torch-table-endstop-y-min.png (file) |  |
42 KB | Rendering of File:Ose-cnc-torch-table-endstop-y-min.stl |
| 07:40, 19 December 2013 | Ose-cnc-torch-table-endstop-y-min-orientated.png (file) |  |
18 KB | |
| 07:39, 19 December 2013 | Ose-cnc-torch-table-endstop-y-min.stl (file) |  |
25 KB | |
| 19:34, 16 December 2013 | Height motor test rig.jpg (file) |  |
1.95 MB | This is a test rig for testing the stepper motor from the CNC_Torch_Table_2 using a Raspberry Pi. More Details: File:Wiring_and_pinouts_for_table_stepper_motor_testing_(rasp_pi).odt A table showing how to connect: * NEMA 23 Stepper Motor (Mo... |
| 22:06, 14 December 2013 | Osage orange identification.gif (file) |  |
56 KB | |
| 22:06, 14 December 2013 | Osage orange fruit.jpg (file) |  |
35 KB | |
| 20:46, 13 December 2013 | Orbit water valve.jpg (file) |  |
10 KB | |
| 20:45, 13 December 2013 | Utility wire.jpg (file) |  |
13 KB | |
| 05:16, 13 December 2013 | Pyfolia.png (file) |  |
57 KB | |
| 05:16, 13 December 2013 | Garden station.jpg (file) |  |
65 KB | |
| 05:15, 13 December 2013 | How-to gardenStation-waterBottle.png (file) |  |
27 KB | |
| 05:11, 13 December 2013 | OEM system.png (file) |  |
42 KB | |
| 05:04, 13 December 2013 | Heatshrink.jpg (file) |  |
278 KB | |
| 04:59, 13 December 2013 | Protoboard2.jpg (file) |  |
196 KB | |
| 04:59, 13 December 2013 | Protoboard1.jpg (file) |  |
60 KB | |
| 04:59, 13 December 2013 | Resistors.jpg (file) |  |
84 KB | |
| 04:59, 13 December 2013 | Photocell.jpg (file) |  |
41 KB | |
| 04:57, 13 December 2013 | Tmp36.jpg (file) |  |
102 KB | |
| 04:56, 13 December 2013 | Lm335.jpg (file) |  |
8 KB | |
| 03:43, 13 December 2013 | Ribbon.png (file) |  |
631 bytes | uploaded a small graphic of a 13 by 2 ribbon cable |
| 03:41, 13 December 2013 | Rasp pinout.png (file) |  |
62 KB | Raspberry Pi Pinout Image |
| 03:39, 13 December 2013 | Rasp v3.pdf (file) |  |
195 KB | Raspberry Pi Pinout pdf |
| 03:36, 13 December 2013 | 57bygh317.jpg (file) |  |
114 KB | |
| 03:34, 13 December 2013 | HY-DIV268N-5A.jpg (file) |  |
50 KB | Motors for the CNC_Torch_Table_2 |
| 03:29, 13 December 2013 | Wiring and pinouts for table stepper motor testing (rasp pi).odt (file) | |
112 KB | A table showing how to connect: * NEMA 23 Stepper Motor (Model 57BYGH317) * Stepper Motor Controller: HY-DIV268N-5A * via a Ribbon Cable to a * Raspberry Pi (Model B, Revision 2.0) |
| 16:23, 4 December 2013 | StoveCoil.jpg (file) |  |
258 KB | Screenshot from the back to see the coil in more detail in File:WoodStoveConcept.skp |
| 16:22, 4 December 2013 | StoveSideView.jpg (file) |  |
141 KB | Screenshot from the side with a section view of File:WoodStoveConcept.skp |
| 16:21, 4 December 2013 | StoveIsoSectionView.jpg (file) |  |
193 KB | Screenshot at an angle with a section view of File:WoodStoveConcept.skp |
| 16:21, 4 December 2013 | StoveIso.jpg (file) |  |
127 KB | Screenshot at an angle of File:WoodStoveConcept.skp |
| 16:20, 4 December 2013 | StoveFront.jpg (file) |  |
128 KB | Screenshot of the front of File:WoodStoveConcept.skp |
| 06:36, 4 December 2013 | CNCTorchTable top.png (file) |  |
7 KB | Screenshot of the top of File:CNCTorchTable.skp |
| 06:35, 4 December 2013 | CNCTorchTable iso bottom.png (file) |  |
58 KB | Screenshot of the bottom (at an angle) of File:CNCTorchTable.skp |
| 06:34, 4 December 2013 | CNCTorchTable bottom.png (file) |  |
17 KB | Screenshot from the bottom of File:CNCTorchTable.skp |
| 06:32, 4 December 2013 | CNCTorchTable.skp (file) | |
164 KB | First version of the sketchup model with the X axis, y axis and the torch table structure. |
| 06:29, 4 December 2013 | CNCTorchTable.png (file) |  |
68 KB | A screenshot of File:CNCTorchTable.skp |
| 19:10, 26 November 2013 | LulzBot TAZ-User Manual-ebook.pdf (file) | |
24.22 MB | Copyright 2013 Aleph Objects, Inc. Permission is granted to copy, distribute and/or modify this document under the terms of the Creative Commons Attribution-ShareAlike 3.0 Unported license (CC BY-SA 3.0). Published by Aleph Objects, Inc., 123 SW 12th S... |
| 03:59, 25 November 2013 | Taz.jpg (file) |  |
229 KB | |
| 08:27, 24 November 2013 | 3D Print process.png (file) |  |
65 KB | |
| 08:20, 24 November 2013 | AO-101-1600.jpg (file) |  |
211 KB | |
| 03:54, 16 November 2013 | 20131116 033945.jpg (file) |  |
652 KB | |
| 22:58, 15 June 2013 | Stick.jpg (file) |  |
137 KB | *Whilst simulating motion of hydraulic cylinder and stick in File:Stick_range.skp, found that it was necessary to move the pivot plate up by 8". |
| 22:57, 15 June 2013 | Stick.skp (file) | |
613 KB | *Whilst simulating motion of hydraulic cylinder and stick in File:Stick_range.skp, found that it was necessary to move the pivot plate up by 8". |
| 22:47, 15 June 2013 | Stick range.jpg (file) |  |
186 KB | *This is a screenshot of File:Stick_range.skp. *Updated stick range with the following feedback from Marcin et al. during hangout as per Samthetechie_log#Sat.2C_Jun_15.2C_2013 Action Item's 3 and 4. *removed old hydraulic cylinder (2.5x36x1.5)[... |
| 22:45, 15 June 2013 | Stick range.skp (file) | |
2.23 MB | *Updated stick range with the following feedback from Marcin et al. during hangout as per Samthetechie_log#Sat.2C_Jun_15.2C_2013 Action Item's 3 and 4. *removed old hydraulic cylinder (2.5x36x1.5)[File:Hydraulic_Cylinder_2.5_inch_bore_36_inch_strok... |
| 20:54, 15 June 2013 | 3x30x1.50 DIA CYL Photo.jpg (file) |  |
279 KB | Photo of 3x30x1.50_DIA_CYL from product pages |
| 20:39, 15 June 2013 | Boom.jpg (file) |  |
132 KB | Changed from 8 foot to six foot and moved the pivot plates as per Samthetechie_log#Sat.2C_Jun_15.2C_2013 |
| 20:38, 15 June 2013 | Boom.skp (file) | |
555 KB | Change from 8 foot to six foot and moved the pivot plates as per Samthetechie_log#Sat.2C_Jun_15.2C_2013 |
| 17:22, 15 June 2013 | 3x30x1.50 DIA CYL.jpg (file) |  |
135 KB | Screenshot of sketchup model of hydraulic cylinder: File:3x30x1.50_DIA_CYL.skp |
| 17:21, 15 June 2013 | 3x30x1.50 DIA CYL.skp (file) | |
512 KB | *Sketchup Model of the 30" stroke cylinder as per: https://www.surpluscenter.com/item.asp?item=9-8262-30&catname=hydraulic *Retracted Length is: 40 1/4 " *Extended Length is 70 1/4 " *Stroke is 30" *Screenshot 800px |
| 23:03, 1 June 2013 | Hydraulic Cylinder 2.5 inch bore 36 inch stroke.jpg (file) |  |
117 KB | =Warnings/Caveats= This model is only intended to show the retracted and extended distance between the mountings of the hyrdaulic cylinder. It should be noted that model is only a work in progress and a lot of the finer details of the geometry are not ... |
