File list
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description |
|---|---|---|---|---|
| 05:59, 3 October 2011 | MAIN ARM CONTROL SIDE WITH DETAIL.jpg (file) |  |
112 KB | Reverted to version as of 05:58, 3 October 2011 |
| 20:08, 25 September 2011 | Hopper layout.jpg (file) |  |
88 KB | |
| 19:53, 25 September 2011 | Hopper jpg.jpg (file) |  |
126 KB | |
| 18:58, 12 September 2011 | Lathe first run.JPG (file) |  |
55 KB | with bed, ways, spindle, motor mount, and carriage |
| 20:04, 5 September 2011 | MultiLathe.JPG (file) |  |
25 KB | after and hour of design and then modeling (purchased parts cad sourced from Mcmaster.com) |
| 23:53, 30 August 2011 | Shonda 2.jpg (file) |  |
22 KB | a less childish photo (if lower quality) |
| 00:01, 28 August 2011 | Centerless grinder.jpeg (file) |  |
51 KB | |
| 18:14, 27 August 2011 | Tool flow.JPG (file) |  |
44 KB | for the multimachine |
| 22:48, 26 August 2011 | Motor hanging.jpg (file) |  |
88 KB | motor in the coupler but no bolts |
| 22:46, 26 August 2011 | Spacers on bearing.jpg (file) |  |
51 KB | |
| 22:43, 26 August 2011 | Coupler.jpg (file) |  |
60 KB | shaft w/ coupler |
| 00:17, 25 August 2011 | Centerlessgrbw.gif (file) |  |
66 KB | concept |
| 16:25, 24 August 2011 | Lathe after.jpg (file) |  |
65 KB | mounted shaft and gear |
| 16:07, 24 August 2011 | Lathe before.jpg (file) |  |
83 KB | before I put in the shaft and gear |
| 16:53, 14 July 2011 | ConcreteRough.JPG (file) |  |
32 KB | first model of a concrete re-bar multimachine, gibbs and insters still to do. |
| 17:21, 1 July 2011 | Spindle2Drawing.JPG (file) |  |
224 KB | full drawing of spindle |
| 01:33, 9 June 2011 | SolidYAxis.PNG (file) |  |
111 KB | a bolt on Y axis table for a lathe, or any other application. |
| 05:12, 8 June 2011 | YAxisTable.jpg (file) |  |
52 KB | y travel table. |
| 03:22, 23 May 2011 | Jershonda Baker.jpg (file) |  |
53 KB | from DC survive the night |
