All public logs
Combined display of all available logs of Open Source Ecology. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 13:22, 25 January 2011 PeterK (talk | contribs) uploaded File:RepRap Testprint.jpg (Printed plastic shapes with different quality.)
- 09:33, 25 January 2011 PeterK (talk | contribs) uploaded a new version of File:RepRap PFTE-Wrapped.png (RepRap part wrapped in PTFE tape, also shown how it fits in the machine.)
- 09:24, 25 January 2011 PeterK (talk | contribs) uploaded File:RepRap PFTE-Wrapped.png (A RepRap part wrapped in PTFE tape.)
- 21:00, 9 November 2010 PeterK (talk | contribs) uploaded File:RepRap First print.jpg (The first test print. A total failure, but one we can learn from.)
- 15:01, 5 November 2010 PeterK (talk | contribs) uploaded File:RepRap Testing nichrome.jpg (Testing the nichrome wire on the extruder board. Values look good.)
- 21:04, 31 October 2010 PeterK (talk | contribs) uploaded File:RepRap X-Y-axes.png (X and Y axes done on RepRap Darwin)
- 13:24, 23 October 2010 PeterK (talk | contribs) uploaded File:RepRap Extruder ground bridges.jpg (AGND needs to be connected with GND using a solderbridge.)
- 15:26, 12 October 2010 PeterK (talk | contribs) uploaded File:RepRap-z-axis.jpg (Improved z-axis for RepRap Darwin)
- 17:24, 11 October 2010 PeterK (talk | contribs) uploaded File:RepRap-nutlink.jpg (Z axes studding link)
- 18:00, 8 October 2010 PeterK (talk | contribs) uploaded File:RepRap-hardware-reconstructed.jpg (Components placed on PCBs to make functional RepRap hardware.)
- 17:44, 8 October 2010 PeterK (talk | contribs) uploaded File:RepRap-SMD-ready.jpg (All SMD components placed (plus a few to test them))
- 14:45, 11 September 2010 PeterK (talk | contribs) uploaded File:RepRapMendelPrintbed.jpg (Aluminum plate for Mendel RepRap printbed.)
- 22:30, 10 September 2010 PeterK (talk | contribs) uploaded File:RepRapMendelThickSheet.jpg (Some of the thick sheet parts for a RepRap Mendel.)
- 12:44, 6 September 2010 PeterK (talk | contribs) uploaded File:RepRapStepperTestSetup.jpg (overview of steppermotor testing layout)
- 14:50, 4 September 2010 PeterK (talk | contribs) uploaded File:RepRapRodsAndStudding.jpg (Rods and studding cut to size and labeled.)
- 14:45, 4 September 2010 PeterK (talk | contribs) uploaded File:RepRapStuddingMeasuring.jpg (To measure a length of studding.)
- 14:28, 4 September 2010 PeterK (talk | contribs) uploaded File:RepRapMyWorkbench.jpg (A workbench I put together to process rods and studding.)
- 16:53, 2 September 2010 PeterK (talk | contribs) uploaded File:RepRapStepperMotors.jpg (NEMA 17 Stepper motors for a RepRap Mendel printer)
- 16:37, 2 September 2010 PeterK (talk | contribs) uploaded File:RepRapBeltsBearings.jpg (Belts and bearings for a Mendel RepRap printer)
- 16:13, 2 September 2010 PeterK (talk | contribs) uploaded File:RepRapNutsBoltsWashers.jpg (A kit with all nuts, bolts and washers for a Mendel RepRap machine.)
- 10:57, 2 September 2010 PeterK (talk | contribs) uploaded File:RepRapOptoEndstop.jpg (RepRap Opto Endtop board)
- 10:36, 2 September 2010 PeterK (talk | contribs) uploaded File:RepRapStepperMotorDriver.jpg (RepRap stepper motor driver board)
- 10:18, 2 September 2010 PeterK (talk | contribs) uploaded File:Extrudercontroller.jpg (RepRap extruder controller board)
- 10:14, 2 September 2010 PeterK (talk | contribs) uploaded File:RepRapMotherboard.jpg (RepRap motherboard v1.2 from German RepRap Foundation)
- 09:53, 2 September 2010 PeterK (talk | contribs) uploaded File:Usbtoserial.jpg (Composed PCB and cable to adapt USB to serial)
- 12:39, 21 August 2010 User account PeterK (talk | contribs) was created