All public logs
Combined display of all available logs of Open Source Ecology. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 03:34, 9 September 2018 Takacsjd (talk | contribs) uploaded File:1Inch PVC D3D HoleJig2013.stl (For drilling holes in 1" PVC pipe to accommodate D3D U-Axis. Use with m6 45mm long screws)
- 17:47, 20 May 2018 Takacsjd (talk | contribs) uploaded File:Frame Gen measurements.JPG (D3D Frame measurments for PVC as cut)
- 17:46, 20 May 2018 Takacsjd (talk | contribs) uploaded File:5 8 d3d Build.jpg (PVC frame built and x/y assym)
- 05:40, 17 April 2018 Takacsjd (talk | contribs) uploaded a new version of File:D3D OHIO 18.01 V0.3 WIP.fcstd (-short idler added. -calcs re-validated extruder can travel full distance of bed.)
- 05:34, 17 April 2018 Takacsjd (talk | contribs) uploaded a new version of File:D3DOH18.01 V0.2 FULL ASSYM.png (-short idler added instead of large one. -measurements made)
- 05:14, 17 April 2018 Takacsjd (talk | contribs) uploaded a new version of File:YMinus bounds extruder d3d oh.png (-Adjustments made for short idler.)
- 05:12, 17 April 2018 Takacsjd (talk | contribs) uploaded a new version of File:XPlus bounds extruder d3d oh.png (Adjustments for short idler ~36mm left over space (around an inch) could be recovered on the rod. elected to leave it in the intrest of room for dual extruders, and to keep the rod length at an even attractive 500mm (~19.7 or 20 inches) last image was...)
- 05:02, 17 April 2018 Takacsjd (talk | contribs) uploaded a new version of File:YPlus bounds extruder d3d oh.png (~over 2 mm space allowed for actuation of endstop. adjustments made for short idler use.)
- 05:01, 17 April 2018 Takacsjd (talk | contribs) uploaded a new version of File:Xminus bounds extruder d3d OH.png (Adjustments made for short idler. Build platform moved slightly in the positive to allow extra room.)
- 04:59, 17 April 2018 Takacsjd (talk | contribs) uploaded a new version of File:XPlus bounds extruder d3d oh.png (-Using short idler. -Accommodated a ~2mm space for end-stop actuation.)
- 13:19, 10 April 2018 Takacsjd (talk | contribs) uploaded a new version of File:D3D OHIO 18.01 V0.3 WIP.fcstd (- Frame added. Y axis moved to side of frame pipes. - Adding in short idler.)
- 17:14, 6 April 2018 Takacsjd (talk | contribs) uploaded a new version of File:D3D OHIO 18.01 V0.3 WIP.fcstd (-Updated x y and z axis to allow them to mount to the PVC using the end nut catchers. more adjustment needed and additional changes to follow per the prior week's meeting. NOTE - Some sort of new part will be useful for rigidly attaching a nut though...)
- 23:39, 30 March 2018 Takacsjd (talk | contribs) uploaded a new version of File:D3DOH18.01 V0.2 FULL ASSYM.png (Reverted to version as of 18:12, 27 March 2018)
- 18:15, 27 March 2018 Takacsjd (talk | contribs) uploaded File:YMinus bounds extruder d3d oh.png
- 18:15, 27 March 2018 Takacsjd (talk | contribs) uploaded File:Xminus bounds extruder d3d OH.png
- 18:14, 27 March 2018 Takacsjd (talk | contribs) uploaded File:YPlus bounds extruder d3d oh.png
- 18:14, 27 March 2018 Takacsjd (talk | contribs) uploaded File:XPlus bounds extruder d3d oh.png
- 18:13, 27 March 2018 Takacsjd (talk | contribs) uploaded a new version of File:D3DOH18.01 V0.2 FULL ASSYM.png (Reverted to version as of 18:12, 27 March 2018)
- 18:12, 27 March 2018 Takacsjd (talk | contribs) uploaded a new version of File:D3DOH18.01 V0.2 FULL ASSYM.png (Reverted to version as of 15:08, 16 March 2018)
- 18:12, 27 March 2018 Takacsjd (talk | contribs) uploaded a new version of File:D3DOH18.01 V0.2 FULL ASSYM.png (Rendering which allows extruder to cover fullbed area. also includes frame)
- 18:09, 27 March 2018 Takacsjd (talk | contribs) uploaded a new version of File:D3D OHIO 18.01 V0.3 WIP.fcstd (Adjusted so nozzel covers full bed area.Rendered PVC frame part as well)
- 15:08, 16 March 2018 Takacsjd (talk | contribs) uploaded a new version of File:D3DOH18.01 V0.2 FULL ASSYM.png
- 15:05, 16 March 2018 Takacsjd (talk | contribs) uploaded a new version of File:D3D OHIO 18.01 V0.3 WIP.fcstd (Simpler version with basic parts. totally rendered!)
- 11:56, 13 March 2018 Takacsjd (talk | contribs) uploaded a new version of File:D3D OHIO 18.01 V0.3 WIP.fcstd (-Added 12" bed. starting to move parts around larger bed for production cut measurements)
- 13:20, 5 March 2018 Takacsjd (talk | contribs) uploaded File:D3D OHIO 18.01 V0.3 WIP.fcstd (Work on D3D ohio - having issues expanding bed graphic to 12" and adjusting the rest of the frame to boot.)
- 18:01, 2 March 2018 Takacsjd (talk | contribs) uploaded File:D3DOH18.01 V0.2 FULL ASSYM.png (First attempt bringing in a model and pvc frame)
- 13:25, 2 March 2018 Takacsjd (talk | contribs) uploaded File:D3DV18.01Frame V0.1.JPG (First rendering, using pipe workbench and auto pvc frame code from ruslan)
- 05:11, 9 February 2018 Takacsjd (talk | contribs) uploaded File:Prusawired.jpg
- 02:55, 9 February 2018 Takacsjd (talk | contribs) uploaded File:RAMPS upgrade.jpg (Upgrading older printer with RAMPS)
- 20:10, 5 February 2018 Takacsjd (talk | contribs) uploaded File:Marlin FW area to edit fillament out detection.PNG
- 18:35, 4 February 2018 Takacsjd (talk | contribs) uploaded File:TakacsOldAirwolf Controlboard.jpg
- 18:34, 4 February 2018 Takacsjd (talk | contribs) uploaded File:TakacsOldAirwolf.jpg (takac's old printer (Prusa i3) Airwolf3D 2013)
- 01:23, 3 February 2018 Takacsjd (talk | contribs) uploaded File:FillaOutSen Artif1.PNG (From https://www.thingiverse.com/thing:2147179)
- 18:34, 28 January 2018 Takacsjd (talk | contribs) uploaded File:TakacsOSECADTest TRY1.mp4 (CAD test with quickened video. 30Minute video could not be fully sped up to 30 seconds and is left at a minute. Also appears to of rendered badly.)
- 04:26, 28 January 2018 Takacsjd (talk | contribs) uploaded File:Takacs - PowerCube.fcstd (Takacs powercube used for freecad test)