File list
This special page shows all uploaded files.
Date | Name | Thumbnail | Size | Description |
---|---|---|---|---|
03:34, 9 September 2018 | 1Inch PVC D3D HoleJig2013.stl (file) | 43 KB | For drilling holes in 1" PVC pipe to accommodate D3D U-Axis. Use with m6 45mm long screws | |
17:47, 20 May 2018 | Frame Gen measurements.JPG (file) | 52 KB | D3D Frame measurments for PVC as cut | |
17:46, 20 May 2018 | 5 8 d3d Build.jpg (file) | 568 KB | PVC frame built and x/y assym | |
05:40, 17 April 2018 | D3D OHIO 18.01 V0.3 WIP.fcstd (file) | 2.44 MB | -short idler added. -calcs re-validated extruder can travel full distance of bed. | |
05:34, 17 April 2018 | D3DOH18.01 V0.2 FULL ASSYM.png (file) | 77 KB | -short idler added instead of large one. -measurements made | |
05:14, 17 April 2018 | YMinus bounds extruder d3d oh.png (file) | 60 KB | -Adjustments made for short idler. | |
05:12, 17 April 2018 | XPlus bounds extruder d3d oh.png (file) | 50 KB | Adjustments for short idler ~36mm left over space (around an inch) could be recovered on the rod. elected to leave it in the intrest of room for dual extruders, and to keep the rod length at an even attractive 500mm (~19.7 or 20 inches) last image was... | |
05:02, 17 April 2018 | YPlus bounds extruder d3d oh.png (file) | 57 KB | ~over 2 mm space allowed for actuation of endstop. adjustments made for short idler use. | |
05:01, 17 April 2018 | Xminus bounds extruder d3d OH.png (file) | 85 KB | Adjustments made for short idler. Build platform moved slightly in the positive to allow extra room. | |
13:25, 2 March 2018 | D3DV18.01Frame V0.1.JPG (file) | 92 KB | First rendering, using pipe workbench and auto pvc frame code from ruslan | |
05:11, 9 February 2018 | Prusawired.jpg (file) | 4.31 MB | ||
02:55, 9 February 2018 | RAMPS upgrade.jpg (file) | 3.66 MB | Upgrading older printer with RAMPS | |
20:10, 5 February 2018 | Marlin FW area to edit fillament out detection.PNG (file) | 125 KB | ||
18:35, 4 February 2018 | TakacsOldAirwolf Controlboard.jpg (file) | 3.21 MB | ||
18:34, 4 February 2018 | TakacsOldAirwolf.jpg (file) | 3.28 MB | takac's old printer (Prusa i3) Airwolf3D 2013 | |
01:23, 3 February 2018 | FillaOutSen Artif1.PNG (file) | 495 KB | From https://www.thingiverse.com/thing:2147179 | |
18:34, 28 January 2018 | TakacsOSECADTest TRY1.mp4 (file) | 13.14 MB | CAD test with quickened video. 30Minute video could not be fully sped up to 30 seconds and is left at a minute. Also appears to of rendered badly. | |
04:26, 28 January 2018 | Takacs - PowerCube.fcstd (file) | 228 KB | Takacs powercube used for freecad test |